We Create Photonic Solutions
Copyright 2009 Clearstone Technologies Inc., All Rights Reserved Contact Us


CF2000
This is our standard table top UV LED controller/power supply. It can be remotely
operated through a USB port and it is RoHS compliant in order to be environmentally
friendly.
Capabilities
Drives up to 3 LED heads simultaneously for multi angle illumination of complex
targets.
Channels self adjust to the drive requirements of various LED heads from Clearstone.
Outputs are protected against abrupt plugging/unplugging of LED heads.
Remote Programming through USB Input
Allows the power level and exposure times to be set, individually turn channels 1-3
on and off and it also has a user-friendly operating manual.
Operating Modes
•Manual timer mode
•Automatic timer mode
•Variable power setting
Features
•Size: 20.3 x 17.2 x 24.1 cm2 (HxWxD), 4.1 kg (9 lb)
•Power Supply: Power input 115/230 VAC, 50-60 Hz
•Mounting Fixture: Facilities for mounting one LED head above the controller
•Accessory kit (Included with CF2000): Footswitch, 6” mounting post, 8” mounting
post, post
clamp, AC Power cable, goggles, USB cable, USB driver CD.
To see compatible CF2000 LED heads, click here.
(CF2000/CF1000 Operations Manual)
CF2000 Front Panel
CT2000
This is our industrial system for use in conveyors, flood chambers and automated
assembly lines. The CT2000 also has a USB interface for automated computer
operation.
Features
Output: Electrical power > 800 watts
Safe operating potential: +48 Volts
Compatible with LTR2 series LED heads
Can drive two LTR2 series heads simultaneously
Remote operation: footswitch/PLC input
Programmable remote operation: USB
Initiate/terminate emission
Set timed exposure
Controls output channel pattern
Power Input: 85-264 VAC 11A, 47-440 Hz.
Case Dimensions (without rack flange): H 5.24"x W 17.03"x D 13.00"
(H 133.1mm x W 432.56 mm x D 330.2mm)
Holes in flange for rack mounting: W 18.3" x H 3.5" (W 464.82mm x H 88.9mm)
To see compatible LED heads, click here.
CT2000 Front Panel
CT2000 Rear Panel
CT2000 with LED head
Controllers/Power Supply
We offer two different types of controllers/power supply, both of which are compatible with several different Clearstone UV LED heads.
All Clearstone products are RoHS compliant.
|
Find spec sheets for all of our products here.
Clearstone's CF2000Rev3.0 is CE Mark Certified!
It is in compliance with the following directives EN 55011:2007 Group 1 Class A Limit and FCC Part 15 Subpart B Class A Limit, pertaining to the emitting of radio frequencies. The CF2000REV3.0 is also in compliance with the low voltage equipment directive 2006/95/EC and the waste electrical and electronic equipment (WEEE) directive 2002/96/EC. Please contact us for more information about our certification!
|